Author: rajiv

Choosing the wrong corrugator machine manufacturer costs more than choosing the wrong model. A model can be changed at order stage; a supplier relationship lasts as long as the machine runs – through every mould set, every diameter addition and every spare part. This checklist is written to be used literally: take it into the…

A corrugated pipe production line is only as fast as its slowest unit. Most capacity disputes on a new line trace back to one of three errors: comparing datasheet outputs that were rated on different polymers, treating kg/hr as if it were metres per hour, or sizing the extruder and the chiller against the corrugator’s…

A corrugators machine is an extrusion forming machine that converts a continuous molten thermoplastic tube into a ridged, ring-profiled pipe by drawing it through two closing chains of water-cooled mould blocks. The corrugator sits immediately after the extruder and die head in a plastic pipe line and is the unit that actually creates the corrugation…

Introduction The same corrugator machine will produce 150 kg/hr on PVC and 80 kg/hr on HDPE. That is not a small variance — it is nearly double, and it means material selection changes your plant economics before you have chosen a model. ITIB corrugator machines process PE, PP, PVC, PA and EVA. This guide sets…